For example: Agilent E4440A or Anritsu 68369
- Test and measurement equipment
- Line Power Analyzers/Monitors
- Dranetz-BMI
- Dranetz-BMI PX5
PowerXplorer Power Analyzer
-
Do you have a PX5 you want to sell?
We buy used equipment!
Learn about selling - Only need this item for a short time? Learn about renting
Dranetz-BMI PX5 Overview
Provides the full range of measurements include V, I, W, VA, VAR, TPF, DPF, Demand, Energy, Harmonics & Inter-harmonics, THD, Harmonics spectrum (V, I, W) to the 63rd, Flicker (Pst, Plt), Crest factor, K factor, Transformer de-rating etc. Min/Max/Avg values are determined in ½ cycle RMS steps. Complete with A/C Flexible Current Clamp DRA-BMI,RR3035A/24, Current Range:- 30/300/3000A AC only. Can be extended to mentioned different ranges of measurement both AC/DC by selecting appropriate current clamps.
High-speed transient capture (1MHz sampling rate) and full range of arithmetic, vector and sequence parameters to evaluate distorted and un-balanced loads as defined in IEEE 1459. Exceeding high/low limits of any active parameter can trigger logging. Voltage and current disturbances can be triggered by peak value, wave-shape change and cycle-by-cycle RMS value change. Pre-event and post-event waveform capture cycles are user adjustable. Voltage and current channels can be cross-triggered. Can be used for power quality measurements, current inrush (cycle-by-cycle current logging), fault recording (cycle-by-cycle voltage logging), long term monitoring and continuous logging at 1 second intervals. The four differential voltages and current channels can also be used independently. Class A compliant with IEC Standard 61000-4-30 Power Quality Measurement Methods (also AS DR04066), AS61000-4-7 Harmonic & Inter-harmonic Measurements and AS61000-4-15 Flicker-meter. All data is collected at 256 samples/cycle/channel.
PowerXplorer Power Analyzer
- Measures W, VA, VAR, TPF, DPF, Demand, Energy, etc.
- 4 differential inputs, 1-600 Vrms, AC/DC, 0.1% rdg, 256 samples/cycle, 16 bit ADC.
- 4 inputs with CTs 0.1-6000 Arms CT-dependent, AC/DC, 0.1%rdg + CTs, 256 samples/cycle, 16 bit ADC.
- 1 MHz High Speed Sampling, 14 bit ADC, 1%FS Frequency Range, 10m Hz resolution, 45-65 Hz.
Compatable probes:
TR-2500/A, TR-2510/A, TR-2520/A, TR-2021*, TR-2019B*, TR-2022*, TR-2023*, ISO-658-5*, RR3035A/xx**, RR6035A/xx**.
* Requires CT adapter CA4300.
** Requires CA4300LEM Adapter, included with our RR3035A/xx probes.
