Fluke DSP-2000 Overview

The DSP-2000 CableAnalyzer:

Delivers TSB-67 Accuracy Level II for Basic Link and Channel as classified by

Underwriters Laboratories, Inc. (UL)

Provides auto-diagnostics of cabling faults in graphical and text representations

Tests NEXT from both ends to 155 MHz

Detects/excludes sources of noise from NEXT measurements

Provides fast test times: completes test of a 4-pair Cat 5 cable in 20 seconds

Stores 1,150 TIA TSB-67 test results and up to 3,000 fiber test results

Monitors traffic on 10BASE-T and 100BASE-TX networks to help you identify if the cable link is the source of the problem

Tests a wide variety of LAN cabling systems: UTP, FTP, STP (IBM type 1,2,6,9), Coax

Includes free Windowsr-based DSP-LINK software - the quick and easy way to upload cable test results to your PC

Provides input protection from live ISDN circuits

Has a bright, back-lit display for hard-to-see locations

Has a rugged, solid construction, built for the job site

DSP-2000 CableAnalyzerTM Specifications:

Cable Types: UTP, FTP, ScTP, STP, Coax

Test Standards: TIA Cat 3, 4, and 5 Basic Link or Channel

ISO11801 Class A, B, C, or D

IEEE 10Base5, 10Base2, or 10base-T

IEEE Token Ring 4 Mbps or 16 Mbps

IEEE 100Base-TX, 100Base-T4

IEEE 802.12 (100VG-AnyLan) 4-UTP or 2-STP

ANSI TP-PMD

Aus/NZ Class C, D Basic Link or Channel

Speed of Autotest Full Autotest of Category 5 UTP cable, including 6 pair

combinations for NEXT in both directions, in less than 20 seconds.

Supported Tests: (range of test is determined by network or selected standard)

Wire Map

Length, Propagation Delay, Delay Skew

Attenuation

NEXT, NEXT @ Remote

Power Sum NEXT, PSNET @ Remote

Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote

Characteristic Impedance

DC Loop Resistance

Return Loss (RL), RL @ Remote

Cable Tone Generator: Tone generator can be detected by a handheld tone probe.

Display: Graphic bit-mapped LCD with back light and adjustable contrast

Test connections: Two shielded 8-pin modular connectors, RJ-45

Input Protection: Protected against continuous telco voltages and 100 mA over-current.

Occasional ISDN over-voltages will not cause damage

EMC: EMC compliant. CE certification by NMi Certin BV. Number.

Power: Main instrument and Smart Remote unit: Rechargeable NiCad battery with 10-12 hours typical battery life

Size: 22.5 x 13 x 7.6 cm (9 x 5 x 3 in)

Weight: 1.5 kg (3.25 lb)

How can we help you with today?