For example: Agilent E4440A or Anritsu 68369
- Test and measurement equipment
- Data Acquisition Systems
- Keysight / Agilent
- Keysight / Agilent 44478A
1.3 GHz 50 Ohm MUX (NO TERM BLOCK)
-
Do you have a 44478A you want to sell?
We buy used equipment!
Learn about selling - Only need this item for a short time? Learn about renting
Keysight / Agilent 44478A Overview
The Agilent 44478A Multiplexer Module is an ideal choice for broadband switching of high-frequency or fast pulse signals. Dual 1-to-4 multiplexers provide bi-directional switching of signals from DC to 1.3GHz. High-channel isolation (>55 dB at 1 GHz) assures quality dynamic-range measurements using spectrum, network, or distortion analyzers. Each 1-to-4 multiplexer consists of seven relays in a ''tree'' structure, which provides high isolation and low VSWR (voltage standing wave ratio). All the connectors on the module''s edge are female BNC for ease of wiring. Off-channels can be terminated in resistors to maintain proper operation of DUT circuitry. Simply plug a 50 Ohm SMB type resistive termination onto the on-board male SMB connector provided for each channel.
Standard Product Includes:
- 44478A Dual 1x4 RF Multiplexer Module
- 1 Connection Terminal
- 1 Certificate of Verification
- Switching up to 1A, 24W or 24VA
- Insertion loss less than 1.9dB at 1.3GHz
- Maximum Scan Rate: 43 Chans/sec
- Maximum Voltage: 42V, DC+AC peak
- Maximum Current: 1A
- Maximum Power:
- Per channel: 24W, 24VA or 44dBm, Characteristic Impedance: 50 Ohm
- For complete information, click on the 3499 Data Sheet link
