Keysight / Agilent 8620A Overview

The Agilent 8620A is a Sweep Oscillator.

The 8620A Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity.

Frequency: 3MHz to 18GHz based on RF Plug-In

Sweep functions: Start-Stop, Delta, CW, Remote Programmed.

Sweep modes: auto, line, external.

Sweep time: 10 msec to 100 sec.

Sweep output: direct coupled, 0 to 10 V.

Modulation: Internal AM 1 kHz; External FM based on RF unit.

Marker: 1

86222B Sweep Oscillator Plug-In:

The 86222B Sweep Oscillator Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept 10MHz to 2.4GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire frequency range. Offers a crystal marker system that provides comb markers at 1, 10, or 50MHz.

Keysight / Agilent 8620A All Available Options

How can we help you with today?