-
Do you have a DSO81304A you want to sell?
We buy used equipment!
Learn about selling - Only need this item for a short time? Learn about renting
Keysight / Agilent DSO81304A Overview
Ultra-high performance oscilloscopes are required to meet the performance needs of engineers designing state of the art high-speed serial communication links and other ultra-high-speed electronic systems. Modern industry bus standards such as Fibre Channel, Fully Buffered DIMM, Serial ATA, Serial Attached SCSI, and PCI-Express have performance points in the 4 to 8.5 Gb/s range. Proprietary high-speed serial buses can also have clock rates in the 4 to 8.5 Gb/s range as well as edge speeds with rise times faster than 50 ps. Ultra-high performance oscilloscopes are required to capture the frequency harmonics of such high-speed signals and make accurate and repeatable measurements on them. Agilent''s award-winning InfiniiMax probing system set the standard for probing systems and the rest of the oscilloscope industry is now following this trend-setting architecture. Agilent''s InfiniiMax II probing system takes this innovation to an unmatched level of performance and usability.
Features
- 13-GHz Bandwidth Oscilloscope
- 4 channels
- 12 GHz bandwidth, 13 GHz DSP enhanced bandwidth oscilloscope with up to 40 GSa/s sample rate
- Up to 2 Mpts MegaZoom deep memory at 40 GSa/s sample rates and 64 Mpts MegaZoom deep memory at 4 GSa/s, after-purchase memory upgrade available
- InfiniiMax II 1169A probing system with 12 GHz specified (13 GHz typical) bandwidth·
- Trigger jitter less than 500 fs rms
- Electronic attenuators eliminate the reliability and ESD discharge concerns associated with mechanical attenuator relays
- Lowest vertical noise floor and lowest jitter measurement floor in the industry
- Unrivaled InfiniiMax probing accessories support browsing, solder-in, socket use, and SMA use models
- E2681A EZJIT Jitter Analysis Software Option
- N5400A EZJIT Plus Jitter Analysis Software Option
- E2688A High-Speed Serial Data Analysiswith Clock Recovery Software Option
- Agilent Infiniium Oscilloscopes and 89601A Vector Signal Analysis Software
- N5392A Ethernet Electrical Performance Validation and Compliance Software
- N5393A PCI Express Electrical Performance Validation and Compliance Software
- N5394A DVI Electrical Performance Validation and Compliance Software
- Serial ATA Signal Quality Compliance Test
- E2683A USB 2.0 Compliance Test Option
- E2697A High Impedance Adapter (includes 500 MHz passive probe)
- E2699A My Infiniium Integration Package Option
- Bandwidth: 12 GHz specified (13 GHz typical)
- Dynamic Range: 3.3 V
- DC Offset Range: ± 16V
- Maximum Voltage: ± 30V
- Differential Input R: 50 k ohm
- Differential Input C: 0.21 pF.
- Single Ended Input R: 25 k ohm.
- Single Ended Input C: 0.35 pF.