For example: Agilent E4440A or Anritsu 68369
- Test and measurement equipment
- EMI Products
- Rohde and Schwarz
- Rohde and Schwarz ESU40
ESU40 20Hz-40GHz EMI Test Receiver
-
Do you have a ESU40 you want to sell?
We buy used equipment!
Learn about selling - Only need this item for a short time? Learn about renting
Rohde and Schwarz ESU40 Overview
The R&S ESU is a new family of CISPR16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic interference measurements. The new FFT-based time-domain scan allows users to perform overview measurements up to 150 times faster than on previous EMI test receivers. The R&S ESU also features automatic and interactive measurement functions, realtime IF analysis and parallel detectors including the new CISPR-RMS detector.
Features
- Frequency ranges from20 Hz to 8/26.5/40 GHz
- Excellent RF characteristics
- Very low measurement uncertainty
- Full compliance with CISPR 16-1-1 standard
- All commercial and military standards met
Rohde and Schwarz ESU40 All Available Options 
| 0-B15 | Extension board only for SFE100 model.02 S/N > 121000 only for SFE100 model.03 S/N > 131000 |
| 0A-C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. |
| 0A-R3 | Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. |
| 0A-R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| 0DKD | SMU200A DKD (ISO17025) calibration incl. ISO9000 calibration (order only with device) |
| B1 | Pre-amplifier mount |
| B10 | Baseband generator with dig. modulation (real time) and ARB (64 M samples) SMU-B13 req. (factory-fitted) |
| B102 | Frequency range 100 kHz - 2.2 GHz for 1st RF path (factory fit only) |
| B103 | Frequency range 100 kHz - 3GHz for 1st RF path (factory fit only) |
| B104 | Frequency range 100 kHz - 4 GHz for 1st RF path (factory fit only) |
| B106 | Frequency range 100 kHz - 6 GHz for 1st RF path (factory fit only) |
| B10x2 | Baseband generator with dig. modulation (real time) and ARB (64 M samples) SMU-B13 req. (factory-fitted) / Path 1 and 2 |
| B11 | Baseband generator with digital mod. (real time) and ARB (16 M samples) SMU-B13 required (factory fitted) |
| B13 | Baseband Main Module (Factory fitted only) |
| B13X2 | Baseband main module RF path 1 and 2 |
| B14 | Fading simulator (required: SMU-B13(factory-fitted) and SMU-B9/B10/B11) |
| B15 | Fading simulator extension SMU-B14 required (factory-fitted) |
| B16 | Differential I/Q outputs (SMU-B13(factory-fitted) required) |
| B17 | Analog/Digital Baseband Inputs (required: SMU-B13(factory-fitted) and SMU-B9/B10/B11) |
| B18 | Digital Baseband Output according to R&S Standard TVR290 (SMU-B13[factory-fitted] required) |
| B2 | Fixture, Tripod Mount |
| B20 | FM/PHIM modulator (SMU-B10X(factory-fitted) required) |
| B202 | Frequency range 100 kHz - 2.2 GHz for 2nd RF path (factory fit only) |
| B203 | Frequency range 100 kHz - 3 GHz for 2nd RF path (factory fit only) |
| B22 | FM/PHIM modulator and enhanced phase noise performance (SMU-B10X(factory-fitted) required) |
| B24 | Internal preamplifier 100kHz to 40GHz; gain 30dB nominal |
| B3 | TS-PR TEFLON NON-REFLECTIVE TRIPOD/MAST COMBO MOUNTING ASSEMBLY |
| B30 | OVERVOLTAGE PROTECTION RF PATH A |
| B31 | High power output for 1st RF path (factory fitted) (for SMU200A with serial number |
| B32 | Overvoltage protection and high power for 1st RF path not SMU-B104/B106(factory fit) |
| B35 | Overvoltage protection for 2nd RF path; not for (factory-fitted) |
| B36 | High power output for 2nd RF path (factory fitted) (For SMU200A with serial number |
| B4 | TS-PR 31 17 horn antenna with 1 & 3 meter horizontal and vertical calibration data (for TS-PR3, TS-PR8 & TS-PR18 ONLY) |
| B5 | TS-PR 3160-9 horn antenna with 1 meter horizontal & vertical calibration data (for TS-PR26 only) |
| B6 | TS-PR 3160-10 horn antenna with 1 meter horizontal & vertical calibration data (for TS-PR40 only) |
| B7 | TS-PR 8 meter low loss ruggedized RF cable (N type connectors for use up to 18 GHz) |
| B81 | Rear panel connectors for 1st RF path (factory-fitted only) |
| B82 | Rear panel connectors for 2nd RF path (factory-fitted only) |
| B9 | Basebandgenerator with dig. modulation (real time) and ARB (128 M Samples) (factory fitted, SMU-B13 required) |
| B90 | Phase Coherence (factory fitted |
| C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 1 additional depot calibration(s). |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| EX-IQ-BOX | Digital I/O adapter module for AFQ, AMU, FMU, FSG, FSQ, SMJ, SMU (AFQ-B18, AMU-B17, AMU-B18, FSQ-B17, |
| K1 | Digital I/Q Interface Option for TSMW for IQ streaming via Gigabit LAN; MatLab and C++ based. |
| K12 | CDMA 1x EVDO Option for TSMU IS-95 and CDMA2000 1xEVDO Rev. A all bands; |
| K14 | WCDMA BCH Demodulator Option for TSMU all bands, requires TSMU-K11. |
| K15 | CW RF Power Measurement Option for TSMU 80 - 3000 MHz, Single or Mult. Channel; Time or distance trigger. |
| K17 | Spectrum Measurement Option for TSMU RF Power Scan 80 - 3000 MHz, single or multi channel. |
| K19 | 802.11A,B,G (REQ B10,B13) |
| K20 | 3GPP FDD W/HSDPA |
| K21 | GSM & WCDMA Option for TSMW WCDMA PN scanner option incl. BCH demodulator |
| K240 | Digital standard GSM/EDGE. (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K241 | Digitaler standard EDGE evolution (SMU-K240 and external PC software |
| K242 | Digital standard 3GPP FDD. (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K243 | 3GPP FDD enhanced MS/BS tests incl. HSDPA. (SMU-B9/B10/B11, SMU-K242 and |
| K244 | Digital standard GPS (SMU-B9/10/11 and WINIQSIM 2 required) |
| K245 | Digital standard HSUPA. |
| K246 | Digital standard CDMA2000 incl. 1xEV-DV. (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K247 | Digital Standard 1XEV-DO REV.A (SMU-B9/10/11 required, WINIQSIM required) |
| K248 | Digital standard IEEE 802.11 (a/b/g). (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K249 | Digital standard IEEE 802.16 (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K250 | Digital standard TD-SCDMA. (SMU-B9/B10/B11 + WinIQSIM 2 required) |
| K251 | Digital standard TD-SCDMA enhanced features. (SMU-B9/B10/B11, SMU-K250 and |
| K252 | ption: Digital Standard DVB-H (SMU-B9/10/11 required, WINIQSIM 2 required) |
| K254 | Digital Standard IEEE 802.11n (SMU-B9/B10/B11 required, WINIQSIM 2 required) |
| K255 | Digital Standard EUTRA (SMU-B9/10/11 + WINIQSIM 2 required) |
| K256 | Playback of XM Radio waveforms (license and waveforms from XM Radio required, |
| K259 | Digital standard HSPA+ (SMU-B9/B10/B11, SMU-K243/K245 and ext. PC software WinIQSIM2 required) |
| K260 | Digital standard Bluetooth Enhanced Data Rate (SMU-B9/B10/B11 and external PC software |
| K261 | Multicarrier CW signal generation (SMU-B9/B10/B11 and WinIQSIM 2 required) |
| K262 | Additive white Gaussian noise (SMU-B9/10/11 + WinIQSIM2 required) |
| K28 | WiMAX Option for TSMW all IEEE802.16e bands requires ROMES4T1W |
| K29 | LTE Option for TSMW requires ROMES4T1W |
| K352 | HD Radio test waveforms. Ibiquity license for customer required (SMU-B9/B10 required) |
| K40 | Digital standard GSM/EDGE (SMU-B9/B10/B11 required) |
| K40x2 | Digital standard GSM/EDGE (SMU-B9/B10/B11 required) / Path 1 and 2 |
| K41 | Digital standard EDGE evolution (SMU-K40 required) |
| K41x2 | Digital standard EDGE evolution (SMU-K40 required) / Path 1 and 2 |
| K42 | Digital standard 3GPP FDD (SMU-B9/B10/B11 required) |
| K42x2 | Digital standard 3GPP FDD (SMU-B9/B10/B11 required) / Path 1 and 2 |
| K43 | 3GPP FDD enhanced MS/BS tests incl. HSDPA (SMU-K42 required) |
| K43x2 | 3GPP FDD enhanced MS/BS tests incl. HSDPA (SMU-K42 required) / Path 1 and 2 |
| K44 | Digital standard GPS (SMU-B9/B10/B11 required) |
| K44x2 | Digital standard GPS (SMU-B9/B10/B11 required) / Path 1 and 2 |
| K45 | 3GPP FDD HSUPA; (SMU-B9/B10/B11 and SMU-K42 required) |
| K45x2 | 3GPP FDD HSUPA; (SMU-B9/B10/B11 and SMU-K42 required) / Path 1 and 2 |
| K46 | Digital standard CDMA2000 incl. 1xEV-DV (SMU-B9/B10/B11 required) |
| K47 | Option:Digital Drandard 1XEV-DO REV.A (SMU-B9/b10/B11 required) |
| K48 | Digital standard IEEE 802.11 (a/b/g) (SMU-B9/B10/B11 required) |
| K49 | Digital standard IEEE 802.16 (SMU-B9/B10/B11 required) |
| K5 | Dig. Std. Bluetooth external PC software SMU-B10/B11 required |
| K50 | Digital standard TD-SCDMA. (SMU-B9/B10/B11 required) |
| K51 | TD-SCDMA enhanced MS/BS tests. (SMU-B9/B10/B11 and SMU-K50 required) |
| K52 | Digital standard DVB-H / DVB-T (SMU-B9/B10/B11 required) |
| K53 | Digital Standard DAB/T-DMB (SMU-B9/B10/B11 required) |
| K54 | Digital Standard IEEE 802.11n (SMU-B9/B10/B11 required) |
| K55 | Digital standard LTE/EUTRA (SMU-B9/B10/B11 required) |
| K55x2 | Digital standard LTE/EUTRA (SMU-B9/B10/B11 required) / Path 1 and 2 |
| K56 | Digital standard XM Radio (SMU-B9/B10/B11 required) |
| K57 | FM stereo modulation (SMU-B9/B10/B11 required) |
| K58 | Sirius Digital Radio. Generation of 1 carrier in real time (SMUB9/B10/B11 required, SMU-B9 |
| K59 | Digital standard HSPA+ (SMU-B9/B10/B11 + SMU-K43/K45 required) |
| K59x2 | Digital standard HSPA+ (SMU-B9/B10/B11 + SMU-K43/K45 required) / Path 1 and 2 |
| K6 | Pulse Sequencer; external PC-Software (SMU-B9/B10/B11 required) |
| K60 | Digital standard Bluetooth Enhanced Data Rate (SMU-B9/B10/B11 required) |
| K61 | Option:Multicarrier CW signal generation (SMU-B9/B10/11 required) |
| K62 | Additional white gaussian noise (SMU-B13(factory-fitted) required) |
| K65 | Assisted GPS (2xSMU-B9/B10/B11 + 2xSMU-K44 required) |
| K68 | Digital standard TETRA Release 2 (SMU-B9/B10/B11 required) |
| K69 | LTE Closed-Loop BS Test HARQ Feedback, Timing Adjustment (SMU-K55 required) |
| K71 | Dynamic fading and enhanced resolution (SMU-B14 required) |
| K72 | Enhanced fading models (SMU-B14 required) |
| K74 | MIMO Fading (SMU-B14 and SMU-B15 as well as two Baseband Sources SMU-B9/B10/B11 req.) |
| K8 | TETRA software for SMU200A (SMU-B9/B10/B11 required) |
| K80 | Bit error rate tester |
| K81 | LTE Logfile generation. Intermediate results and logfiles of the LTE signal generation process |
| R3 | Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| SMU200DKD | SMU200A DKD (ISO17025) calibration incl. ISO9000 calibration (order only with device) |
| SMV03-DKD | SMV03 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| TH | TSMU-H Scanner for Mobile RF Networks for ROMES Drive Test Systems; 12 VDC power supply; |
| TK11 | WCDMA Option for TSMU all bands. |
| TK13 | GSM Option for TSMU all bands. |
| TS-55CONN | GM TS-55CONN CONNECTION BOX |
| TS-CBXRRM | 4:1 Combiner for RRM and InterRAT systems 0.3 GHz - 3 GHz, 6 dB loss |
| TS-CRRM1 | LVD CABLE SET FOR CONNECTING RRM WITH 1 EXTERNAL CRTU-W TO TS8950W |
| TS-CRRM2 | LVD CABLE SET FOR CONNECTING RRM WITH 1 EXTERNAL CRTU-W AND 1 EXTERNAL CRTU-G TO TS8950W |
| TS-CRRM3 | LVD CABLE SET FOR CONNECTING RRM IN A TS8950W WITH TWO INTERNAL (RACK-MOUNTED) CRTU-W |
| TS-CRRM4 | LVD CABLE SET FOR CONNECTING RRM WITH 1 EXTERNAL CRTU-G IN A TS8950W WITH TWO INTERNAL (RACK-MOUNTED) CRTU-W |
| TS-CRRM5 | LVD CABLE SET FOR CONNECTING RRM IN A TS8950GW WITH TWO INTERNAL CRTU-W AND 1 INTERNAL CRTU-G |
| TS-CRRM6 | LVD CABLE SET FOR CONNECTING RRM IN A TS8950GW WITH 1 INTERNAL CRTU-W AND 1 INTERNAL CRTU-G AND 1 EXTERNAL CRTU-W |
| TS-EMF | Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH |
| TS-EMFZ2 | Cable set for TS-EMF |
| TS-EX-IQ2 | Baseband digital combiner unit BS & MS |
| TS-F1A | SHIELDED FIXTURE WITHOUT FITTINGS |
| TS-F1A1 | ACOUSTICS KIT FOR FIXTURE |
| TS-F1C1 | FIXTURE CABLING: USB, RS232, PSU, AUDIO |
| TS-F1I1 | ADAPTER INTERFACE FOR USB UND TS-PRL1 |
| TS-F1MA1 | MOUNTING KIT FOR ACOUSTIC KIT AND UNIVERSAL DUT HOLD-DOWN |
| TS-F1N1 | UNIVERSAL ANTENNA COUPLER 770-960MHZ/ 17 |
| TS-F1P1 | DUT HOLDER PLATES |
| TS-F1P1UN | DUT HOLDER PLATE FOR RF FIXTURE FULLY MOUNTED, W: SELF ADHESIVE SPONGE, W/O VG CONNECTOR |
| TS-F1P2 | HOLD DOWN PLATE FOR RF FIXTURE (NOT CUSTOMIZED) |
| TS-F1PNE4 | PNEUMATIC 4x KIT FOR TS-F1P1 AND TS-F1P2 |
| TS-F1PNE8 | PNEUMATIC KIT 8 X FOR TS-F1P1 AND TS-F1P2 |
| TS-F21AB1 | Absorber kit for elevated cover |
| TS-F21ABS | Absorber kit for TS7121 |
| TS-F21AGB | Antenna coupler for TS7121: GSM,CDMA2000 2 inputs - GSM, etc.: 770 - 900 MHz and 1.7 - 2.2 |
| TS-F21FU2 | USB filter feedthrough for TS7121 - Feedthroug filter USB 1.1 and 2.0 - Exchangeable connector plate |
| TS-F23A-G | Absorber and antenna coupler GSM, CDMA20 for TS7123 - Antenna coupler |
| TS-F23AB1 | Absorber kit for elevated cover |
| TS-F23ABS | Absorber kit for TS7123 |
| TS-F23EC1 | Elevated cover for TS7123 height: 160 mm (without absorber) |
| TS-F23FU2 | USB filter feedthrough for TS7123 - Feedthroug filter USB 1.1 and 2.0 - Exchangeable connector plate |
| TS-F2X-B2 | Bluetooth antenna set for TS712x - Bluetooth, WLAN b/g - 2,4 GHz antenna - N connector to SMA RF cable |
| TS-F2X-G | Antenna coupler GSM, CDMA2000, WCDMA for TS7123 and TS7121 (770 - 900 MHz a. 1.7 - 2.2 GHz) |
| TS-F2X-I4 | ISM antenna coupler for TS712x frequency bands (315, 434, 850-950 MHz) - mounting part |
| TS-F3F | OPTION FOR TS-PAD3: FIXTURE-FRAME FOR TEST- FIXTURE |
| TS-F3X1 | OPTION FOR TS-F3F: CONNECTOR CARRIER FOR FEEDTHROUGH, 5 PCS |
| TS-FCBV | FIXTURE CAP FOR INTEGRATION OF CAMERA IN TS7110 |
| TS-PR1 | PREAMPLIFIER 30 MHZ TO 1000 MHZ, gain min. 25 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PR18.03 | TS-PR18; PREAMPLIFIER ANTENNA SYSTEM; 1GHZ - 18 GHz, INCLUDING 115V POWER SUPPLY; 0.5M ANTENNA CABLE AND RUGGEDIZED SHIPPING CASE |
| TS-PR26 | PREAMPLIFIER 18 GHZ TO 26.5 GHZ, gain min. 29 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PR3 | PREAMPLIFIER 30 MHZ TO 3 GHZ, gain min. 25 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PR40 | PREAMPLIFIER 26.5 GHZ TO 40 GHZ, gain min. 50 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PR7 | PREAMPLIFIER 30 MHZ TO 7 GHZ, gain min. 25 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PR8 | PREAMPLIFIER 30 MHZ TO 8 GHZ GAIN MIN 29 DB INCL. - 115 V POWER SUPPLY, 0.5M ANTENNA CABLE, RUGGARIZED SHIPPING CASE |
| TS-PRO3 | PREAMPLIFIER 9 KHZ TO 300 MHZ, gain min. 18 dB, incl., - 115 V POWER SUPPLY, - 0.5 m Antenna Cable, - Ruggedized Shipping Case |
| TS-PS24 | EXTERNAL 24V POWER SUPPLY |
| TS-RBRF | RF-Relay Matrix plug-in module Basic for TS-RSP bis 18 GHz |
| TS-REMI | Plug-in module EMI for TS-RSP |
| TS-REMS | Plug-in module EMS for TS-RSP |
| TS-RSP | Relay switch unit with rear contacts basic unit for plug-in modules |
| TS7121A | RF Test Chamber (WxHxD=155x305x428) - Automatically open and closing drawer (WxD=80x194) |
| TS7121M | RF Test Chamber (WxHxD=155x305x428) - manually opening and closing drawer (WxD=80x194) |
| TS7123A | HF-Test Chamber (WxHxD=330x347x428) - Automatically open and closing drawer (WxD=245x238) |
| TS7123M | HF-Test Chamber (WxHxD=330x347x428) - Manually drawer (WxD=245x238) Window (WxH=252x198-28) |
| TS8-KM100 | CONTEST LTE FDD R&D TX app. package |
| TS8-KM110 | CONTEST R&D RX test application package; permanent license |
| TS895RA | 19" system single rack for RRM system 37 HU, fans incl. rack adaptors for NRVS and DPSP |
| TS95A16 | GSM/UMTS/CDMA antenna magnetic mount 850/900/1800/1900/2100 band N-connector |
| TS95AUDIO | 2 x audio Unit M-AUDIO Firewire for SQA for R&S® ROMES Drive Test Systems. Model M-Audio firewire high end unit, 24-bit/96kHz converter (ADC/DAC) 2-way, allows voice quality measurements with R&S® ROMES SQA option up to 2 mobiles parallel UL & DL IEE |
| TS95LICHL | USB hardlock for time license server necessary for every client with floating licenses |
| TS95UM5 | UMTS & GSM/GPRS TEST MOBILE "SAMSUNG Z500" BASED ON QUALCOMM CHIPSET MSM6250; UMTS & TRIBAND GSM/GPRS/EDGE (900/1800/1900); CODECS FOR EFR, FR, HR, WCDMA; CLASS 10 |
| TSEMF-O3 | EMC-tripod for TS-EMF |
| TSEMF-O5 | Tripod for TS-EMF |
| TSML-C | CDMA Radio Network Analyzer requires ROMES3T12 for operation with ROMES SW, no antenna included |
| TSML-CW | CW Radio Network Analyzer requires ROMES3T15 for operation with ROMES SW, no antenna included |
| TSML-G | GSM Radio Network Analyzer requires ROMES3T13 for operation with ROMES SW, no antenna included |
| TSML-GW | GSM WCDMA Radio Network Analyzer requires ROMES4T1Q for operation with ROMES SW, no antenna included |
| TSML-W | WCDMA Radio Network Analyzer requires ROMES3T11 for operation with ROMES SW, no antenna included |
| TSML-Z1 | TSMU/Q/L socket power supply input 100 - 240V AC, 47 - 63 Hz 30W |
| TSMQ | TSMQ Quad Tech Drive Test Receiver for ROMES Drive Test Systems; 12 VDC power supply; |
| TSMQ-R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty |
| TSMU | TSMU Scanner for Mobile RF Networks for ROMES Drive Test Systems; 12 VDC power supply |
| TSMW | TSMW High Performance Scanner 2 Receivers with 20MHz IF BW integrated GPS, 12 V DC |
| TSMX-PPS | GPS Module uBlox for ROMES Drive Test Sy incl. external active uBlox Antenna with PPS-Output, USB-Connector |
| TZ1 | Power Supply 230 VAC 12VDC / 6 A for TSMU / TSMU-H / TSML / TSM-DVB and TSMQ, desktop version |
| TZ2 | Rack Adapter 19" TSMx for TSMU / TSMU-H / TSML / TSM-DVB, 2HU 1 or 2 devices |
| TZ3 | Indoor Back-Pack System for ROMES Drive Test Systems; Frame with accu pack 3000 mAh / 12 V; |
| Z1 | TSMW External Power Supply Input 90 - 260 V AC 47 - 63 Hz, 120 W |
| Z5 | Accessory: BNC adapter for rear panel AUX I/O connector |
| Z6 | Accessory: Cable for connecting digital baseband interfaces of R&S instruments according to TVR290 |
| ZZA-411 | 19" adapter, 4 HU, 1/1 for BW2000 cabinets |