| .C3 |
Three years of depot Factory Standard Calibration coverage based on the R&S recommended calibration interval - includes test data. |
| .C5 |
Five years of depot Factory Standard Calibration coverage based on the R&S recommended calibration interval - includes test data. |
| .R3 |
Three years of depot repair coverage, including Factory Standard re-calibration if necessary to complete the repair. |
| .R5 |
Five years of depot repair coverage, including Factory Standard re-calibration if necessary to complete the repair. |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| FS-K10 |
GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU) |
| FS-K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| FS-K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
| FS-K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| FS-K5U |
Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU) |
| FS-K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| FS-K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP, |
| FS-K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG; |
| FS-K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| FS-K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| FS-K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
| FS-K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
| FS-K9 |
Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| FSG13.C3 |
Three years of depot Factory Standard Calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| FSG13.C5 |
Five years of depot Factory Standard Calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| FSG13.R3 |
Three years of depot repair coverage, including Factory Standard re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| FSG13.R5 |
Five years of depot repair coverage, including Factory Standard re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| FSQ-B17 |
Digital Baseband Interface Not retrofittable |
| FSQ-K100 |
EUTRA/LTE downlink, application firmware |
| FSQ-K101 |
EUTRA/LTE uplink, application firmware |
| FSQ-K102 |
EUTRA/LTE Downlink, MIMO. PC software for FSG and FSQ (FSQ-K100 required) |
| FSQ-K104 |
Analysis of EUTRA/LTE TDD downlink signals (for FSG, FSQ) |
| FSQ-K105 |
Analysis of EUTRA/LTE TDD uplink signals (for FSG, FSQ) |
| FSQ-K70 |
Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK, |
| FSQ-K90 |
Application firmware WLAN 802.11A TX tests (EMV, flatness, mask) for FSQ |
| FSQ-K90U |
Upgrade from FSQ-K90 to FSQ-K91, 802.11A,B,G,J TX tests requires 512 MB memory |
| FSQ-K91 |
Application firmware WLAN 802.11A,B,G,J TX tests requires 512 MB memory |
| FSQ-K91N |
Upgrade of FSQ-K91 to 802.11n |
| FSQ-K92 |
Application firmware WIMAX (802.16-2004) TX measurements |
| FSQ-K92U |
Upgrade of FSQ-K92 to FSQ-K93 |
| FSQ-K93 |
Application firmware for WIMAX IEEE 802.16e, WIBRO |
| FSQ-K94 |
Application firmware for WIMAX IEEE 802.16e-2005 MIMO |
| FSQ-K96 |
Generic OFDM measurement demodulator. Selectable pilot and data carriers and modulation type |
| FSU-B25 |
Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ |
| ZZA-411 |
19" adapter, 4 HU, 1/1 for BW2000 cabinets |
