| B1 |
Distance To Fault measurement for FSH3/6 ( model .13/.23/.26 only), including 1 m cable (FSH-Z2 or |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-1 |
Documentation of calibration values |
| FSH3-DCV |
Calibration Documentation FSH3/FSH313/FSH323 |
| HZ-15 |
Probe set for E and H nearfield emissions 30 MHz to 3 GHz |
| HZ-16 |
Preamplifier 100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15 |
| K1 |
Remote control (via RS-232) for FSH3/6 |
| K2 |
Vector reflection and transmission measurement for FSH3/6 (only model .13/.23/.26) |
| K3 |
Receiver mode for FSH3/6 |
| R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| RAZ |
Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors |
| TS-EMF |
Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH |
| Z1 |
Average power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW |
| Z14 |
Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx |
| Z18 |
Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx |
| Z2 |
VSWR bridge and power divider for FSH3/6 (model .13/.23/26 only) 10 MHz - 3 GHz, incl. FSH-Z29 |
| Z22 |
Serial/parallel converter for printers with parallel interface for FSH3/6/18 |
| Z25 |
Soft carrying bag for FSH3/6/18 |
| Z26 |
Hard case for FSH3/6/18 |
| Z29 |
Spare load/open/short calibration standard for FSH3/6 N-connector |
| Z30 |
Spare open/short standard for FSH-Z2, for calibration of VSWR measurement |
| Z31 |
Spare 50 Ohm load standard for FSH-Z2, for calibration of VSWR and DTF measurement |
| Z32 |
Spare battery pack for FSH |
| Z33 |
Spare power supply for FSH3/6/18 including mains plug for EU, GB and US |
| Z34 |
Optical RS232 interface cable 1.5 m for FSH3/6/18 (spare) |
| Z35 |
CD-ROM including FSH view software and manual for FSH3/6/18 (spare) |
| Z36 |
Spare headphones for FSH3/6/18, additional haedphones for |
| Z44 |
Directional power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx |
