Rohde and Schwarz FSH606

Call Us: (949)-679-5561

Specials

For example: Agilent E4440A or Anritsu 68369

Spectrum Analyzer, Hand Held, 100 KHz to 6 GHz w/ preamp.

Get Quote Add to Quote List

Do you have a FSH606 you want to sell?
We buy used equipment!
Learn about selling
Only need this item for a short time? Learn about renting

Model:FSH606

Manufactured by: Rohde and Schwarz

Category:Spectrum Analyzers

Rohde and Schwarz FSH606 - Spectrum Analyzers

Rohde and Schwarz FSH606 Overview

The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH6's range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.

Features:

Frequency range 100 kHz to 6 GHz
High level accuracy : 0.5 dB typ
Displayed average noise level typ. -114 dBm (RBW 1KHz)
Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
Wide range of detectors : sample, max/min peak , auto peak, RMS
Tracking Generator from 5 MHz to 3 GHz

Supplied with:

Battery Pack
AC Power Supply
RS-232 Optical Intfc Cable
CD-ROM
Headphones
AC Mains Adapter (EU)
AC Mains Adapter (UK)
AC Mains Adapter (US)
Quick Start Manulal English Ver 5.0

Rohde and Schwarz FSH606 All Available Options

C3	Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5	Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-1	Documentation of calibration values
FSH-K3	Receiver mode for FSH3/6
FSH-Z25	Soft Carrying Bag
HZ-15	Probe set for E and H nearfield emissions 30 MHz to 3 GHz
HZ-16	Preamplifier 100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15
K1	Remote control (via RS-232) for FSH3/6
K2	Vector reflection and transmission measurement for FSH3/6 (only model .13/.23/.26)
R3	Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
R5	Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
RAZ	Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors
TS-EMF	Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH
Z1	Average power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW
Z14	Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx
Z18	Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx
Z22	Serial/parallel converter for printers with parallel interface for FSH3/6/18
Z25	Soft carrying bag for FSH3/6/18
Z26	Hard case for FSH3/6/18
Z3	VSWR bridge with DC BIAS and bypass switch. 10 MHz - 6 GHz for FSH3/6 (only model .13/.23/.26)
Z32	Spare battery pack for FSH
Z33	Spare power supply for FSH3/6/18 including mains plug for EU, GB and US
Z34	Optical RS232 interface cable 1.5 m for FSH3/6/18 (spare)
Z35	CD-ROM including FSH view software and manual for FSH3/6/18 (spare)
Z36	Spare headphones for FSH3/6/18, additional haedphones for
Z37	Optical USB interface cable, 1.5 m for FSH3/6/18 (spare)
Z44	Directional power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx

How can we help you with today?

Email Address *

Company name

Contact

Phone number

Ietm(s) *

Comment