B10 |
GPIB interface |
B22 |
RF preamplifier, gain 20 dB (software license) |
B30 |
DC power supply 12 - 28 V |
B31 |
NiMH battery pack |
B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
B6 |
TV trigger (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
B7 |
NarrowOption resolution filters, 10 Hz - 300 Hz (software license) |
B8 |
Gated sweep function (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
C3 |
Three years of Factory Standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
C3 |
Three years of Factory Standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
C5 |
Five years of factory standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. ( ) |
C5 |
Five years of factory standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. ( ) |
DCV-1 |
Documentation of calibration values |
DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
DKD |
FSL18 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
FSH-Z2 |
VSWR bridge and power divider for FSH3/6 (model .13/.23/26 only) 10 MHz -3 GHz, incl. FSH-Z29 |
FSH-Z38 |
75 ohm matching pad N to BNC (female) |
K14 |
Spectrogram measurement, application firmware (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
K20 |
Application firmware for cable TV and TV measurements (software license) |
K30 |
Application firmware for noise figure and gain measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
K400 |
RFEX-Launcher for FSL Required for installation and operation of EMF software RFEX on FSL |
K7 |
Analogue demodulation AM/FM/PM (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
K72 |
3GPP Code Domain Power measurements for base station (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
K82 |
CDMA2000® base station analysis (software license) |
K84 |
Analysis of 1xEV-DO base station signals (software license) |
K9 |
Power sensor measurements with NRP (software license) |
K91 |
Application firmware for WLAN 802.11A,B,G measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
K91N |
Upgrade of FSL-K91 to 802.11n (software license) |
K92 |
Application firmware for WiMAX# 802.16, OFDM measurements (software license) |
K92U |
Upgrade from R&S®FSL-K92 to R&S®FSL-K93 (software license) |
K93 |
Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
R3 |
Three years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. |
R3 |
Three years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. |
R5 |
Five years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. |
R5 |
Five years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. |
RAM |
Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at both ends, N-connectors |
RAZ |
Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors |
Z3 |
Soft carrying bag |
Z4 |
Additional charger unit for FSL-B31. Allows charging the battery without FSL |
ZRB2 |
SWR bridge 5 - 3000 MHz, 50 Ohm, 0.5 W, N connectors directivity 46/40 dB |
ZRC |
SWR bridge 50 Ohm 40 kHz - 4 GHz, calibration standard incl. test port connector N female |
ZZA-S334 |
Adapter for BW2000 3HU 3/4 cabinet with impact protection |