| 0-C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| 0-C5 |
Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| 0-R3 |
Three years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by th 12 |
| 0-R5 |
Five years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by th 12 |
| 0DKD |
FSMR50 DKD(ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| B18 |
Removable hard disk (factory installed) |
| B19 |
Second removable hard disk for FSMR-B18 |
| B2 |
YIG preselection for image suppression for f > 3.6 GHz for FSMR50 (only ex factory) |
| B73 |
Vector signal analysis 28 MHz demodulation bandwidth, broadband demodulation hardware included |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibrations |
| C5 |
Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibrations |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| FS-K15 |
VOR/ILS measurements for FSMR |
| FS-K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| FS-K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
| FS-K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| FS-K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| FS-K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP, |
| FS-K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG; |
| FS-K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| FS-K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| FS-K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
| FS-K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
| FSMR50DKD |
FSMR50 DKD(ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| FSP-B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
| FSQ-B512 |
CPU RAM upgrade to 512 MB for instruments with CPU board 1091.2520 |
| FSU-B12 |
Output attenuator for tracking generator for FSU, FSQ |
| FSU-B24 |
Preamplifier 30dB, 100 kHz to 50GHz (for FSMR26/43/50, FSQ26/40, FSU26/43/46/50; |
| FSU-B25 |
Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ |
| FSU-B4 |
OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| FSU-B5 |
Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8 |
| FSU-B9 |
Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz |
| R3 |
Three years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by the 12-month new product warranty |
| R5 |
Five years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by the 12-month new product warranty |
| Z2 |
Attenuator kit for verification of FSMR linearity (accessory incl. PTB certificate |
| ZZA-411 |
19" adapter, 4 HU, 1/1 for BW2000 cabinets |
