Rohde and Schwarz FSQ3

Call Us: (949)-679-5561

Specials

For example: Agilent E4440A or Anritsu 68369

RF Spectrum Analyzer and Signal Analzer 20Hz to 3.6 GHz

Get Quote Add to Quote List

Do you have a FSQ3 you want to sell?
We buy used equipment!
Learn about selling
Only need this item for a short time? Learn about renting

Model:FSQ3

Manufactured by: Rohde and Schwarz

Category:Spectrum Analyzers

Rohde and Schwarz FSQ3 - Spectrum Analyzers

Rohde and Schwarz FSQ3 Overview

Key Facts The Signal Analyzer R&S FSQ combines two instruments in one. It offers signal analysis at a demodulation bandwidth of up to 120 MHz with the dynamic range of a high-end spectrum analyzer. Features

Frequency range: 20 Hz to 3.6 GHz, 8GHz, 26,5GHz and 40 GHz
Dynamic range of a high-end spectrum analyzer
TOI + 25 dBm, typ.
1 dB compression +13 dBm, typ.
84 dB ACLR/3GPP with noise correction
28 MHz demodulation bandwidth (optional 120 MHz)
16 Msample I and Q memory
Application firmware for digital demodulation measurement
Bluetooth
GSM/EDGE
3 GPP WCDMA, HSDPA, TD-SCDMA
CDMA2000, 1xEV-DV, 1xEV-DO
WLAN 802.11a/b/g/j
WiMax IEEE 802.16-2004,802.16e
General purpose vector signal

Rohde and Schwarz FSQ3 All Available Options

B10	External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
B100	I/Q memory extension 235 Msamples Extendable up to 705 Msamples (Not retrofittable, excludes FSP-B10)
B102	I/Q memory extension Extends FSQ-B100 to 705 Msamples (FSQ-B100 required)
B12	Output attenuator for tracking generator for FSU, FSQ
B17	Digital Baseband Interface Not retrofittable
B18	Removable Hard Disk (not retrofittable)
B19	Second Hard Disk for FSQ-B18 (for FSQ-B18, variant 1303.0400.03)
B25	Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
B28	Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
B33	Disabled USB ports excludes FS-K9
B4	OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
B71	Analogue base band inputs 50 Ohm/1M Ohm input impedance information bandwidth 36 MHz
B72	Bandwidth extension for IQ-Demodulation and Vectorsignalanalysis 120MHz IQ bandwidth.
B9	Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
C3	Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5	Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-2	Documentation of calibration values
DCV-ZP	Printout of DCV (additional, in combination with DCV-Option only)
DKD	FSQ3 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device)
EX-IQ-BOX	Digital I/O adapter module for AFQ, AMU, FMU, FSG, FSQ, SMJ, SMU (AFQ-B18, AMU-B17, AMU-B18, FSQ-B17,
FS-B33	USB mass memory write protection, disables writing to USB memory sticks (ex factory only)
FS-K10	GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU)
FS-K110	Analysis of TETRA II / TEDS signals (for FSQ, FSU with option FSU-B73)
FS-K15	VOR/ILS measurements for FSMR
FS-K30	Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
FS-K40	Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
FS-K5	Application firmware GSM/EDGE tests for FSP, FSU, FSQ
FS-K5U	Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU)
FS-K7	FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
FS-K72	Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
FS-K73	Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
FS-K73+	3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP,
FS-K74	3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K74+	3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG;
FS-K76	3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K77	3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K8	Application firmware for Bluetooth measurement on FSP, FSU and FSQ
FS-K82	CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
FS-K83	CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
FS-K84	1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K85	1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
FS-K9	Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
FSP-B10	External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
FSP-B28	Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
FSU-B12	Output attenuator for tracking generator for FSU, FSQ
FSU-B25	Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
FSU-B4	OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
FSU-B5	Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8
FSU-B88	RF hardware option 1 FSU8/FSQ8
FSU-B9	Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
K100	EUTRA/LTE downlink, application firmware
K101	EUTRA/LTE uplink, application firmware
K102	EUTRA/LTE Downlink, MIMO. PC software for FSG and FSQ (FSQ-K100 required)
K104	Analysis of EUTRA/LTE TDD downlink signals (for FSG, FSQ)
K105	Analysis of EUTRA/LTE TDD uplink signals (for FSG, FSQ)
K30	Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
K4	PHASE NOISE MEASUREMENT S/W
K40	Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
K5	Application firmware GSM/EDGE tests for FSP, FSU, FSQ
K7	FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
K70	Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK,
K72	Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
K73	Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
K74	3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
K76	3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
K77	3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
K8	Application firmware for Bluetooth measurement on FSP, FSU and FSQ
K82	CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
K83	CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
K84	1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
K85	1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
K9	Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
K90	Application firmware WLAN 802.11A TX tests (EMV, flatness, mask) for FSQ
K90U	Upgrade from FSQ-K90 to FSQ-K91, 802.11A,B,G,J TX tests requires 512 MB memory
K91	Application firmware WLAN 802.11A,B,G,J TX tests requires 512 MB memory
K91N	Upgrade of FSQ-K91 to 802.11n
K92	Application firmware WIMAX (802.16-2004) TX measurements
K92U	Upgrade of FSQ-K92 to FSQ-K93
K93	Application firmware for WIMAX IEEE 802.16e, WIBRO
K94	Application firmware for WIMAX IEEE 802.16e-2005 MIMO
K96	Generic OFDM measurement demodulator. Selectable pilot and data carriers and modulation type
Q3-DKD	ISO 9000 Calibration / data
R3	REPAIR SERVICE 3 YEARS
R5	Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
U3	CPU board upgrade and 1.5GB memory extension for FSQ without flash drive FSQ-B18
Z2	Compact Keyboard with Trackball
Z4	DC Block 10 KHz - 18 GHz N Connector 50 Ohm, 50 VDC
Z5	2.4 mm Test Port Adapter
ZZA-411	19" adapter, 4 HU, 1/1 for BW2000 cabinets

How can we help you with today?

Email Address *

Company name

Contact

Phone number

Ietm(s) *

Comment