B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
B12 |
Output attenuator for tracking generator for FSU, FSQ |
B16 |
LAN interface |
B18 |
Removable hard disk for spectrum analyzer family FSU with Win XP (factory installed) |
B19 |
Second hard disk for FSU-B18 analyzer firmware for FSU with Win XP included |
B20 |
Extended environment specification. Random vibr. 1.9G RMS, 0-55°C (not retrofittable) |
B25 |
Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ |
B27 |
FM output, 10 MHz bandwidth |
B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
B33 |
USB mass memory write protection, disables writing to USB memory sticks (ex factory only) |
B4 |
OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
B5 |
Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8 |
B73 |
Vector signal analysis for FSU demodulation bandwidth 8 MHz (FSU), broadband demodulation hardware included |
B85 |
Extended displayed average noise level spec.for option preamplifier R&S®FSU-B25 (for R&S®FSU3 / FSU8 only. R&S®FSU-B25 |
B87 |
Extended linearity specification for specific channel filters |
B88 |
RF hardware option 1 FSU8/FSQ8 |
B9 |
Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz |
C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
D3 |
TEST DATA |
DCV-2 |
Documentation of calibration values |
DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
DKD |
FSU3 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
FS-B33 |
USB mass memory write protection, disables writing to USB memory sticks (ex factory only) |
FS-K110 |
Analysis of TETRA II / TEDS signals (for FSQ, FSU with option FSU-B73) |
FS-K15 |
VOR/ILS measurements for FSMR |
FS-K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
FS-K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
FS-K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
FS-K5U |
Upgrade of R&S®FS-K5 to R&S®FS-K10, GSM/EDGE/EDGE Evolution measurement application, |
FS-K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
FS-K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
FS-K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
FS-K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for R&S®FSP/FSQ/FSU with WinXP, |
FS-K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
FS-K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG with WinXP; |
FS-K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
FS-K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
FS-K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
FS-K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
FS-K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
FS-K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
FS-K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
FS-K9 |
Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
FSP-B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
FSP-B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
K10 |
GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU) |
K15 |
VOR/ILS measurements for FSMR |
K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
K4 |
PHASE NOISE MSMT |
K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
K5U |
Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU) |
K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP, |
K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG; |
K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
K9 |
Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
R3 |
Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
Z1 |
Service kit for spectrum analyzer family FSU |
ZZA-411 |
19" adapter, 4 HU, 1/1 for BW2000 cabinets |