| B18 |
Removable Flash Disc for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| B22 |
Generator attenuator port 2 mechanical, 70 dB in 10-dB-steps 8 GHz |
| B31 |
Receiver attenuator port 1 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B32 |
Receiver attenuator port 2 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| B7 |
Measurements on pulsed signals. Pulse profile,Recording time up to 25ms, up to 30MHz bandwidth |
| C3 |
THREE YEARS OF US DEPOT CALIBRATIONS BASED ON R&S RECOMMENDED CALIBRATION INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH PRODUCT DELIVERY WITH 2 ADDITIONAL DEPOT CALIBTATIONS. |
| C5 |
FIVE YEARS OF US DEPOT CALIBRATIONS BASED ON R&S RECOMMENDED CALIBRATION INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH PRODUCT DELIVERY WITH 4 ADDITIONAL DEPOT CALIBTATIONS |
| DCV-2 |
Documentation of calibration values |
| DKD |
ZVA8 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| K17 |
Increases the receiver bandwidth to 5MHz |
| K2 |
Time domain (for ZVA, ZVB, ZVT) |
| K27 |
Two internal pulse generators (for ZVA and ZVT) |
| K30 |
Noise figure measurement on linear and frequency converting 2 port devices (for ZVA, ZBV and ZVT, |
| K4 |
Frequency converting measurement for ZVA and ZVT |
| K5 |
Phase measurement on mixers (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required) |
| K7 |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K9 |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| R3 |
THREE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY |
| R5 |
FIVE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY |
