For example: Agilent E4440A or Anritsu 68369
- Test and measurement equipment
- Power Supplies
- Sorensen
- Sorensen DCS55-55
DC Pwr Supply 55V/55A Prog Switchin
-
Do you have a DCS55-55 you want to sell?
We buy used equipment!
Learn about selling - Only need this item for a short time? Learn about renting
Sorensen DCS55-55 Overview
DC Programmable Switching Supplies (1 kW, 1.2 kW & 3 kW)
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis., Demonstrated large installed base over a long period of time, the DCS family provides a highly reliable power platform.
This family has an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.
The DCS family can also be controlled remotely. Four analog control modes are standard as well as isolated analog control (option). Computer control can be accomplished over IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option)
- Meter Accuracy 1% of full scale + 1 count
- Max. Voltage Differential from Output to Safety Ground 150 VDC
- Remote Start/Stop and Interlock TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure
- Cooling Internal fan, over temperature shutdown if internal heat sink exceeds set temperature
- Remote Sense The maximum allowed sense line drop is 4V per line (2V on the DCS 8/10V 1 kW/1.2 kW models and 1V/line for all 3 kW models). Line drop subtracts from the maximum available output voltage at full rated power.
- Remote Programming Enabled via external jumper on rear panel connector J3
- Overvoltage Protection Crowbar type adjustable from 5-110% of rated output using front panel control (local or remote program selectable via J3 jumper)
- Remote Analog Programming Linearity ±1% Accuracy: ±5%
- Regulatory Certified to UL/CSA 61010 and IEC/EN 61010-1 CE Compliant (LVD and EMC directive)
