Tektronix MDO3024 Overview

Product Features:

• TekVPI probe interface directly supports active, differential, and current probes for automatic scaling and units
• 9 in. (229 mm) WVGA wide screen color display
• Small footprint and lightweight – Only 5.8 in. (147 mm) deep and 9.2 lb. (4.2 kg)
• FastAcq high-speed waveform capture rate finds elusive signal anomalies quickly
• Wave Inspector Controls provide easy navigation and automated search of waveform data
• 33 automated measurements and waveform histograms for simplified waveform analysis

Oscilloscope

• 4 analog channels
• 200 MHz bandwidth models
• Bandwidth is upgradable (up to 1 GHz)
• Up to 5 GS/s sample rate
• 10 M record length on all channels
• >280,000 wfm/s maximum waveform capture rate
• Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth

Spectrum Analyzer

• Frequency Range:
  • Standard: 9 kHz - oscilloscope bandwidth
  • Optional: 9 kHz - 3 GHz
• Ultra-wide capture bandwidth up to 3 GHz

Arbitrary Function Generator (Optional)

• 13 predefined waveform types
• 50 MHz waveform generation
• 128 k arbitrary generator record length
• 250 MS/s arbitrary generator sample rate

Protocol Analyzer (Optional)

• Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0,CAN, LIN, FlexRay, MIL-STD-1553, and Audio standards

Digital Voltmeter (Free with product registration)

• 4-digit AC RMS, DC, and AC+DC RMS voltage measurements
• 5-digit frequency measurements

Spectral Analysis

• Dedicated front-panel controls for commonly performed tasks
• Automated peak markers identify frequency and amplitude of spectrum peaks
• Manual markers enable non-peak measurements
• Trace types include: Normal, Average, Max Hold, and Min Hold
• Spectrogram display enables easy observation and insight into slowly changing RF phenomena
• Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)

Arbitrary Function Generation

• Generate predefined signals to quickly simulate missing devices in designs
• Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG
• Add noise to any signal to easily perform margin testing

Mixed signal design and analysis

• Automated triggering, decode, and search on parallel buses
• Multichannel setup and hold triggering
• MagniVu high-speed acquisition provides 121.2 ps fine timing resolution on digital channels

Protocol Analysis

• Trigger, decode and automatically search on packet-level content on most common embedded design serial bus standards
• Export protocol decode tables for use in documenting results

Digital Voltmeter and Frequency Counter

• Quickly validate voltage or frequency measurements at a glance
• Graphical readout provides information on stability of the measurement

Fully upgradable

• Add functionality, increase bandwidth or spectrum analyzer frequency range over time as your needs change or budget allows

Optional application support

• Power analysis
• Limit and mask testing

The Tektronix MDO3024 Mixed Domain Oscilloscope is the ultimate 6-in-1 integrated oscilloscope that includes an integrated spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer, and digital voltmeter/counter. The Tektronix MDO3024 is completely customized and fully upgradable; Add the instruments and performance you need now - or later.

At the core of the Tektronix MDO3024 is a world-class oscilloscope, offering comprehensive tools that speed each stage of debug – from quickly discovering anomalies and capturing them, to searching your waveform record for events of interest and analyzing their characteristics and your device’s behavior.

Digital phosphor technology with FastAcq high-speed waveform capture

To debug a design problem, first you must know it exists. Every design engineer spends time looking for problems in their design, a time-consuming and frustrating task without the right debug tools.

Digital phosphor technology provides you with fast insight into the real operation of your device. Its fast waveform capture rate – greater than 280,000 wfm/s with FastAcq – gives you a high probability of quickly seeing the infrequent problems common in digital systems: runt pulses, glitches, timing issues, and more.

To further enhance the visibility of rarely occurring events, intensity grading is used to indicate how often rare transients are occurring relative to normal signal characteristics. There are four waveform palettes available in FastAcq acquisition mode.

• The Temperature palette uses color-grading to indicate frequency of occurrence with hot colors like red/yellow indicating frequently occurring events and colder colors like blue/green indicating rarely occurring events
• The Spectral palette uses color-grading to indicate frequency of occurrence with colder colors like blue indicating frequently occurring events and hot colors like red indicating rarely occurring events.
• The Normal palette uses the default channel color (like yellow for channel one) along with gray-scale to indicate frequency of occurrence where frequently occurring events are bright.
• The Inverted palette uses the default channel color along with gray-scale to indicate frequency of occurrence where rarely occurring events are bright.

Tektronix MDO3024 All Available Options

How can we help you with today?